Extrusion press in Accessory section:Wax Extrusion,Hydraulic Press,Hydraulic Wax Injection Machine,Wax Injection Press,Leak Test Machine

Contact Us

ADDRESS

Plot No. 4212, Vatva
GIDC Industrial Estate,
Phase IV,
Ahmedabad - 382 445
Gujarat - INDIA.

Phone : 91-79-66317058

Phone : 91-79-25841099

WEBSITE

www.samaytechindia.com

E-MAIL

info@samaytechindia.com

samaytech@rediffmail.com

Wax Extrusion

Wax Injection Machine

Wax Injection Machine Manufacturer

Extrusion press in Accessory section

Extrusion press in Accessory section

Working pressure

1500 PSI Max

Wax slug size

87.5 mm x 230 mm long

Die temp to be maintain

60 c.

Wax cylinder bore

100 mm (4' 0)

Hydraulic cylinder bore

179 mm (7' 0)

Hydraulic cylinder stroke

432 mm (17')

Piston rod

76 mm (3')

Flow control for forward stroke

By P & T Compensated flow valve

Flow control for Return stroke

By flow control valve : with check valve

Induction motor

A.	HP	:	5.00
B.	RPM	:	1440
C.	Type	:	IP-55
D.	Frame size	:	112 M
E.	Make	:	GEC/Siemens/Crompton

Extrusion operation

A.	Forward by	:	Foot switch.
B.	Return by	:	Push button with Holding &Iripping by pressure switch.
C.	Forward speed	:	0.08 Mtr/Min.
D.	Reveres speed	:	1.0 Mtr/ Min.

Safely

Wax cylinder guard with limit switch

Temp. control of die

By temp. Controller type 5002U (PT-100) range of 0' to 200' with 2 Relays and two set point, Masibus make Control switch for selection of high and law set point should be provided.

Die heating

Cartridge heater 3/8'X 2.5' Long, 24V, 75W-06 nos.

Painting

One coat of red oxide primer and two coat of synthetic enamel paint. Brown colour. Make: Nerolac

Application

To make wax extruded runner for wax pattern assembly

Operation & maintenance manual with list of spares

2 copies should be supplied with equipment.